大家在查：液压密封件基础元件格来圈斯特封中国汽车产品认证中心单端面机械密封零泄漏摩擦功率填料密封浮动密封

密封端面

网络seal face

密封端面

密封端面

密封端面

seal face

机械密封_百度百科 ... 107. TC—tungsten carbide: 硬质合金 2. seal face-- 密封端面 3. seal interface-- 密封界面 ...

1

In addition, the radial taper of the deformed seal face was calculated with the moment theory .

再次，依据筒壳力矩理论求解了密封端面的变形锥度。

3

A higher pressure of the inlet fluid will result in the increases of thermo -elastic deformation and the balancing film thickness.

流体注入压力越高，热弹变形量越大，密封端面平衡间隙亦越大。

5

The friction state of the end faces of mechanical seals is a key factor that can decide their operating life and sealing performance .

机械密封端面摩擦状态是决定机械密封工作寿命和密封性能好坏的关键因素。

6

The mechanism of sealing face operating failure under the action of dynamic pressure is proposed .

提出动压作用下密封端面开启失效机理；

8

Design and Selection is not correct, the low pressure end seal or sealing material such as shrinkage of the larger .

6 设计选型有误，密封端面比压偏低或密封材质冷缩性较大等。

10

Geometry Optimization of Spiral Groove Upstream Pumping Mechanical Seals

螺旋槽上游泵送机械密封端面参数结构优化

11

Coupling Analysis of Frictional Heat of Fluid Film and Thermal Deformation of Mechanical Seal End Faces

机械密封端面摩擦热与热变形的耦合分析

12

Analytical Calculation for Force Distortion On the End of Mechanical Seal

机械密封端面力变形的解析计算

13

Test Research on Friction Performance of the Laser-textured Porous Seal Face

激光加工多孔密封端面的摩擦性能试验研究

14

Test analysis of dynamic pressure on the end surfaces of mechanical seals for gas-liquid phases under varied working conditions

变工况时气液两相机械密封端面动压实验分析

15

Face Movement Experimental Analysis on Anti-changing Mechanical Seal

变工况机械密封端面运动实验分析

16

Monitoring Technique of Contact Degree between Mechanical Seal Faces

机械密封端面接触状态测控技术

19

Flow field and pressure distribution in a radial groove gas face seal

径向直线槽气体密封端面流场和压力分布

20

Visual design for mechanical sealed surface with chamfer character

机械密封端面槽形的可视化设计

热词推荐

大家在看